|
S
p a r t a n 1 5 0 S A |
|
(Shown with optional stand)
| The SPARTAN 150 SA Paper Cutter is a sleek,
strong, 15" table-top machine perfect for the professional office, copy
center, in-plant, and on-demand printing environment. Holding true to
our tradition, the Spartan 150 SA is engineered and manufactured to the
highest of safety standards available in the world. Safety shields cover
the front and rear tables. The front-side cut buttons require two hands
to simultaneously activate the cut cycle. |
|
F
e a t u r e s |
| Power Cutting: |
Electric power - 1/2HP Gear Drive Motor |
| Manual Clamping: |
Hand crank wheel system provides over
200% more clamping force than the lever clamping system. RESULT - a
better cut. |
| Safety Guards: |
Safety covers over the front table (the
cutting area) and rear table. |
| Safety Dual Cut Buttons: |
Requires the simultaneous use of both
hands to operate. |
| Construction:
|
Heavy Duty Steel, Cast Iron, and Cast
Aluminum Construction gives it "Challenge durability". Hardened steel
components and bronze bearings on most wear surfaces increase the life
of the machine. |
|
EXCLUSIVE SPARTAN 150 SA FEATURES:
LED Digital Backgauge Position Display -
The easy to read digital display located
on the front table of the machine allows the operator to easily set the
backgauge position accurately…everytime.
LED Cut-Line Light -
Twelve red LED lights positioned over the
knife provides the brightest, most consistent and easy to see optical
cut-line in the industry.
Auto Releasing Front Safety Shield -
Front shield automatically pops open
after a cut cycle is completed allowing the operator to remove the cut
stock without the extra step of having to manually open the cover.
Virtually Maintenance Free Knife Bar Gibs -
"Gibs" are devices used to control the
knife position during a cut cycle assuring a consistent and accurate
cut. Traditionally, these surfaces require routine lubrication because
of the continuous surface friction they have with the moving knife bar.
The Spartan 150 SA gibs however, are made of an advanced material called
UHMW that is both strong and self-lubricating - resulting in virtually
maintenance free durability.
|
|
S
p e c i f i c a t i o n s |
| Maximum Cutting Width: |
15-3/4" (40cm) |
| Clamp Opening |
1-1/2" (3.8cm) |
| Minimum Cut: |
1-15/16" (3.8cm) |
| Maximum Cut: |
15-1/4" (38.7cm) |
| Table Space In Front of Knife |
9" (22.9cm) |
| Overall Height |
21-1/2" (54.6cm) |
| Overall Width |
25-3/4" (65.4cm) |
| Overall Length |
31" (78.7cm) |
| Net Weight |
170 lbs (77kg) |
| Shipping Weight |
200 lbs (91kg) |
| Shipping Weight with Stand |
250 lbs (113kg) |
1/2 H.P. 1 Phase, 60 Hz, 120 Volt, AC
Service Size: 15 Amps |
|
Challenge reserves the right to make changes to any
product or specification without notice and without incurring responsibility
to existing units.
|
|
A
d d i t i o n a l R e s o u r c e s |
Spartan 150 Product Literature:
(click filename to view, right click & "save
target as" to download) |
Spartan_150.pdf
(0.4 Mb) |
Spartan 150 SA Operator's Manual:
(click filename to view, right click & "save target as" to download) |
F.150-O.pdf
(4.9 Mb) |
Spartan 150 SA Quick Set-up Guide:
(click filename to view, right click & "save target as" to download) |
150SA_setup_guide.pdf
(0.9 Mb) |
Spartan 150 SA Instructional Video (mpg):
(click filename to view, right click & "save target as" to download) |
150SA_Video.zip
(30.5 Mb) |
| Request more information: |
Click Here |
|
|
|
