MS-5


 

 

 

 

Demonstration Video

(click to view)

 

 

 

- Multi-Hole Drilling - up to 5 Holes
- Side Guide Adjustments
- Backgauge Adjustments
- Easy Drill Length Adjustment
- 2" Hollow Drill Bits Available in 13 sizes
- 2-1/2" Hollow Drill Bits Available in 4 sizes
- Hollow Drill Bits Also Available With Teflon Coating
Number of Drill Heads 2 to 5
Drill Sizes Available (2" capacity) 1/8" to 1/2" / 3 to 13 mm
Drill Sizes Available (2-1/2" capacity) 1/4" to 1/2" / 6 to 13 mm
Center to Center Distance Maximum 15" / 38 cm
Center to Center Minimum (standard) 1-7/8" / 48 mm
Center to Center Minimum (optional narrow heads) 1-3/8 / 35 mm
Maximum Drilling Capacity 2-1/2" / 63 mm
Strokes per Minute (adjustable) Up to 18
Backgauge Adjustment 0 to 5" / 0 to 13 cm
Vertical Adjustment of Individual Heads 1/4" / 6 mm
DIMENSIONS
Table Size 17-3/4" x 34" / 45 x 87 cm
Table Height 37" / 94 cm
Overall Height 56" / 142 cm
Floor Space Needed 36" x 36" / 92 x 92 cm
Net Weight (approximate) 830 lbs / 374 kg
Shipping Weight (approximate) 910 lbs / 410 kg
ELECTRICAL
Standard -

1 Phase, 60 Hz, AC.   Pump: 1/2 HP.  Spindle Motor: 1-1/2 HP.
208/230 Volts, 18 Amps (service size 30 Amps)

Optional -

3 Phase, 50 Hz, AC.   Pump: 1/2 HP.  Spindle Motor: 1-1/2 HP.
208/230 Volts, 12 Amps (service size 20 Amps)

Challenge reserves the right to make changes to any product or specification without notice and without incurring responsibility to existing units.

Product Literature:
(click filename to view, right click & "save target as" to download)
MS-5.pdf
Operator, Technical, & Parts Manuals: Product Manual Search Page
Electrical Installation Specifications Electrical_Install_Specs.pdf
 

 

Home | Products | Support | Dealer Locator | About Challenge | Contact Us